Home > 실험실 안내 > 최근 발표논문
1. C. Park, K-s Bang, H-g Kim and S-j Jung, "Mechanical Properties of Si 3 N 4 Ceramic Composites with Aligned Whisker Seeds", J. of Ocean Eng. and Tech.,27(2), pp 8-12,2013.
2. K-s Bang, W. Kil and W-s Jang, "Effects of Chemical Composition on the Microstructure and Mechanical Properties of FCAW-S Weld Metal Containing 2% Ni", Met. Mater. Int.,19(2), pp 329-334,2013
3. C. Park, K-s Bang and W-c Seo, "Microstructure and Impact Toughness of Weld Metal in Multipass Welded Super Duplex Stainless Steel", J. of Ocean Eng. and Tech.,26(6), pp 27-32,2012
4. C. Park, K-s Bang, S. Danyluk, H-d Kim and D-s Park, "Pressureless-sintering of reaction bonded silicon nitride containing cordierite", J. of Ceramic Processing Research,13(3), pp 226-230,2012
5. K-s Bang and W-c Seo, "Effects of Diffusible Hydrogen Content and Hardness on Cold Cracking in High Strength Weld Metal", J. of Ocean Eng. and Tech.,26(2), pp 33-38,2012
6. K-s Bang, C. Park, W. Kil and W-s Jang, "Variation of Toughness and Porosity Formation in Weld Metal with Al Content in Self-Shielded Arc Welding Wire", J. of the Korean Weld. Soc.,29(1), pp 74-79,2011
7. K-s Bang, C. Park, K-w Lee and J-y Lee, "Weldability of Low-Carbon ASTM A356 CA6NM Martensitic Stainless Steel Casting for Power Plants", J. of the Korean Inst. of Met. and Mater.,49(1), pp 73-78,2011
8. K-s Bang, H-c Jung and I-w Han, "Comparison of the Effects of Fluorides in Rutile-Type Flux Cored Wire", Met. Mater. Int.,16(3), pp 489-494,2010
9. K-s Bang, J-b Lee, H-c Jung and D-w Han, "Quantitative Analysis on the Effects of Welding Parameters on Diffusible Hydrogen Contents in Weld Metal Produced by FCAW Process", J. of the Korean Weld. Soc.,28(2), pp 174-179,2010
10. K-s Bang, C. Park, J-b Lee and H-c Jung, "Effects of Flux Composition on the Element Transfer and Mechanical Properties of Weld Metal in Submerged Arc Welding", Met. Mater. Int.,15(3), pp 471-477,2009
11. K-s Bang, C. Park, B-c Bae, D-s Park and W-c Seo, "Microstructural Development of Si 3 N 4 Ceramics Containing Aligned β - Si 3 N 4 Whisker Seeds", J. of Ocean Eng. and Tech.,23(5), pp 32-38,2009
12. K-s Bang, B-h Chi and W-c Seo, "Effects of Carbon Content on the Weldability of B-Containing 620 ℃ Grade High Cr Ferritic Cast Steel for Turbine Casing", J. of Ocean Eng. and Tech.,22(6), pp. 41-45,2008
13. K-s Bang, C-s Ryu, M-y Lee and W-s Jang, "Laser Welding of AZ31B-H24 Mg Alloy with AZ61 Filler Wire", J. of the Korean Weld. Soc.,26(6), pp 598-602,2008.
14. K-s B ang, D-h Jung, C. Park and W-s Chang, "Effects of Welding Parameters on the Tensile Strength of weld metal in flux Cored Arc Welding", Sci. and Tech. of Weld. and Join., Accepted
15. K-h Ko, K-s Bang, K-t Lim, D-s Park, H-d Kim and C. Park, "Microstructural Study of a Discoloration Process During Reaction Bonding of Silicon Nitride", J. of Ceramic Processing Research,8(3), pp 199-202,2007.
16. K-s Bang, W-y Kim, C. Park, Y-h Ahn and J-b Lee, "Effects of Nitrogen on Weld Metal Microstructure and Toughness in Submerged Arc Welding", Mat. Sci. Forum,539-543, pp 3906-3911,2007
17. C-h Park, K-s Bang, K-t Lim, D-s Park aad H-d Kim, "The Effect of Nitrogen Partial Pressure on Microstructure of Reaction Bonded Silicon Nitride", Solid State Phenomena,121-123, pp 231-234,2007.
18. K-s Bnng, C. Park and S. Liu, "Effects of Nitrogen Content and Weld Cooling Time on the Simulated Heat-Affected Zone Toughness in a Ti-Containing Steel", J. Mat. Sci.,41, pp 5994-6000,2006.
19. H-j Cho, H-i Kim, C-k Cheon, W-s Chang and K-s Bang, "Evaluation of friction Spot Joining Weldabiㅣity cf Al Alloys for Automotive", J. of the Korean Weld. Soc.,24(1), pp 50-55,2006.
20. J-c Byun, K-s Bang, W-s Chang, C-g Park and W-h Chung, "Effects of Heat input and Interpass Temperature on the Strength and Impact Toughness of Multipass Weld Metal in 570MPa Grade Steel",J. of the Korean Weld. Soc.,24(1), pp 64-70,2006.
21. D-s Park,H-d Kim, K-t Lim, K-s Bnng and C. Park, "Microstructure of Reaction Bonded Silicon Nitride fabricated Under Static Nitrogen Pressure", Mat. Sci. and Eng- A,405, pp 158-162,2005
22. K-s Bang, G. Chirieleison and S. Liu, "Gas Tungsten Arc Welding of Titanium Using Flux Cored Wire with Magnesium fluoride", Sci. and Tech. of Weld. and Join., 10(5), pp 617-623,2005.
23. J-s Noh,H-j Kim, W-s Chang and K-s Bang, "Evaluation of FSW Weldability of Wrought and Cast Mg Alloys", J. of the Korean Weld. Soc.,22(5), pp 53-57,2004.
24. J-s Noh, H-j Kim, W-s Chang and K-s Bang, "Evaluation of Joint properties of Friction Stir 'Welded AZ3 IB Mg Alloys",J. of the Korean Weld. Soc.,22(3), pp 56-61,2004
25. X. Xu, S. Liu and K-s Bang, "Comparison of Metal Transfer Behavior in Electrodes for Shielded Metal Arc Welding", Int. J. of korean Weld. Soc.,4(1), pp 15-22,2004.
26. C-h Bae, H-k Choi and K-s Bang, "Characterization of Wear Resistance of Particle Reinforced Al Mafrix Composite Manufactured by Centrifugal Spray Casting", J. of the Korean Foundrymen's Soc.,24(2), pp 108-114,2004.
27. K-s Bang, "Effects of Manganese and Carbon on the HAZ Microstructural Evolution in Titanium Oxide Steel", J. of the Korean Weld. Soc.,22(2), pp 78-84,2004.
28. D-y Shon, K-s Bang, K-w Lee and B-h Chi, "Effects of Heat Treaunent Condition on the Mechanical Properties and Weldability of 100Cr-lMo-VNbN Cast Steel",J. of the Korean Inst. of Met.and Mater.,41(11), pp 791-796,2003.
29. K-s Bang and W-y Kim, "Estimation and Prediction of HAZ Softening in Thermomechanically Controlled Rolled and Accelerated Cooled Steel", Welding Journal,81(8), pp 174s-l79s,Aug.,2002.
30. K-s Bang and H-s Jung, "Effect of Nitrogen Content on the Simulated Heat Affected Zone Toughness of Titanium Containing Thermomechanically Controlled Rolled Steel", Mat. Sci. and Tech.,18, pp 649-654, June,2002
31. S-h Kim, C-y Kang and K-s Bang, "Weld Metal Impact Toughness of Electron Beam Welded 9% Ni Steel", J. Mat. Sci., 18, pp649-654,June,2002
32. K-s Bang and B-c Kim, "Prediction of the Effect of Nitrogen on HAZ Toughness of TMCP Steel",'in Conf, Proc., The 10th International Conference on the Joining of Materials, pp 200-208, Helsingor,Denmark, May 2001