2023
45. Jung-Hee Lee, Jae-Seob Kwak, "Condition Monitoring and Diagnosis for REMF Process Based on Deep Neural Network Using Acousitc Emission Signal", Trans. of the KSME(A), Vol. 47, No. 11, pp. 893~900, 2023.
44. Jae-Young Lee, Jung-Hee Lee, Jae-Seob Kwak, "A Study on Moldflow-based Optimization of Filling Balance for Cooling Fan", The Korean Soc. for Power System Eng., Vol. 27, No. 4, pp. 13~18, 2023.
2022
43. Jung-Hee Lee, Yeo-Kyung Jung, Jae-Seob Kwak, "Surface Image Classification Model of Ni-Ti Alloy Using CNN Based on MBConv Block", Trans. of the KSME(A), Vol. 46, No. 9, pp. 853~858, 2022.
42. Jung-Hee Lee, Jin-Kyung Lee, Jae-Seob Kwak, "Development and Evaluation of Non-linearity Predictive Surface Roughness Model for Non-contact Finishing Product", Trans. of the KSME(A), Vol. 46, No. 9, pp. 835~841, 2022.
41. Jung-Hee Lee, Jae-Seob Kwak, "A Study on Improving Deburring Efficiency Using Non-Contact Finishing Process", J. of the Korean Society of Manuf. Process Eng., Vol. 21, No. 6, pp. 74~80, 2022.
2020
40. Jung-Hee Lee, Seong-Jin Eom, Jae-Seob Kwak, "The Process Factor Characteristics and Surface Roughness Prediction of Engineering Plastics in CNC Turning", J. of the Korean Society of Manuf. Process Eng., Vol. 19, No. 6, pp. 77~79, 2020.
39. Jung-Hee Lee, Hyun-Sun Bae, Jae-Seob Kwak, "Dimensional Optimization of Electric Component in Ultra Thin-wall Injection Molding by Using Moldflow Simulation", J. of the Korean Society of Manuf. Process Eng., Vol. 19, No. 7, pp. 1~6, 2020.
2019
38. Kyoung-Ho Ha, Jung-Hee Lee, Dae-Min Kang Jae-Seob Kwak, "A Study on Ergonomic Cushion for Prevention of Plantar Fasciitis Using FEA", Trans. of the KSME(A), Vol. 43, No. 3, pp. 193~199, 2019.
37. Jung-Hee Lee, Jae-Seob Kwak, "The Study on Burr Removal Rate Along the Cutting Radial Distance in U-type Flow channel", J. of the Korean Society of Manuf. Process Eng., Vol. 18, No. 7, pp. 8~13, 2019.
36. Jung-Hee Lee, Jae-Seob Kwak, "Development of Advanced Medical Support Application
Using Indirect Coating System and Roll-to-roll Mechanism", J. of the Korean Society of Manuf. Process Eng., Vol. 18, No. 2, pp. 1~6, 2019.
2018
35. Jung-Hee Lee, Jae-Seob Kwak, "A Study on Marine Generator System for Reduction in Air Pollutants", Trans. of the KSME(A), Vol. 42, No. 10, pp. 939~ 944, 2018.
34. Joo-Kwon Kim, Jung-Hee Lee, Jong-Sun Kim, Jun-Han Lee, Jae-Seob Kwak, "A Study on the Process Optimization of Microcellular Foaming Injection Molded Ceiling Air-Conditioner 4-Way Panel", J of the Korean Soc. of Manuf. Process Eng., Vol. 17, No. 6, pp. 98~104, 2018.
33. Jung-Hee Lee, Jae-Seob Kwak, Kwang-Heui Kim, "A Study on Efficiency of Fuel Cell for Marine Generators", J of the Korean Soc. of Manuf. Process Eng., Vol. 17, No. 5, pp. 52~57, 2018.
32. Jung-Hee Lee, Gyeong-Ah Kang, Jae-Seob Kwak, "Valve Seat Design for Full Contact Effect Using Grey Relational Analysis", J of the Korean Soc. of Manuf. Process Eng., Vol. 17, No. 4, pp. 17~22, 2018.
31. Ju-Eun An, Jung-Hee Lee, Jae-Seob Kwak, "Tool Wear Rate and Accuracy of Patterns in Micro Prismatic End-milling", J of the Korean Soc. of Manuf. Process Eng., Vol. 17, No. 3, pp. 1~6, 2018.
2017
30. Joo-Kwon Kim, Jong-Sun Kim, Jun-Han Lee, Jae-Seob Kwak, "A Study on the Optimization of the Dimensional Deviation due to the Shortening of the cycle Time for Rear Cover of Mobile Phone", J of the Korean Soc. of Manuf. Process Eng., Vol. 16, No. 6, pp. 117~124, 2017.
29. Joo-Kwon Kim, Jong-Sun Kim, Jun-Han Lee, Jae-Seob Kwak, "A Study on Dimension Optimization of Injection-molded Automotive Bumper by Six Sigma", J of the Korean Soc. of Manuf. Process Eng., Vol. 16, No. 6, pp. 109~116, 2017.
2016
28. Dong-Hyun Jin, Jae-Seob Kwak, "A Study on Accuracy Improvement of Dual Micro Patterns Using Magnetic Abrasive Deburring", Trans. of the KSME(A), Vol. 40, No. 11, pp. 943~948, 2016.
27. Ju-Eun An, Sung-Ho Lee, Jae-Seob Kwak, "Tool Alignment and Machining Accuracy in Micro End Milling", J of the Korean Soc. of Manuf. Technol. Eng., Vol. 25, No. 2, pp. 143~148, 2016.
26. Sung-Ho Lee, Gyeong-Ah Kang, Jae-Seob Kwak, Ju-Eun An, Dong-Hyun Jin, Byung Tak Kim, "New Seat Design and Finite Element Analysis for Anti-Leakage of Globe Valve", Trans. of the KSME(A), Vol. 40, No. 1, pp. 81~86, 2016.
2015
25. Gyu-Sang Lee, Dong-Hyun Jin, Jae-Seob Kwak, "A Study on Plastic Injection molding of a Metallic Resin Pigment Using a Rapid Heating and Cooling System", J of the Korean Soc. of Manuf. Process Eng., Vol. 14, No. 2, pp. 87~92, 2015.
24. Ji-Hwan Seo, Byung-Tak Kim, Do-Hun Chin, Moon-Chul Yoon, Jae-Seob Kwak, "Comparsion of the Contact Characteristics for Sealing Strips of the Tsunami Damper", J of the Korean Soc. of Manuf. Process Eng., Vol. 14, No. 1, pp. 21~28, 2015.
2014
23. Sung-Ho Lee, Byung-Hun Son, Jae-Seob Kwak, "Study on Effect of Particle Size of Ferrous Iron and Polishing Abrasie on Surface Quality Improvement", Trans. of the KSME(A), Vol. 38, No. 9, pp. 1013~1018, 2014.
2013
22. Tae-Soo Kwak, Jae-Seob Kwak, "Magnetic Abrasive Polishing Technology with Ceramic Particles", J. of the Korean Soc. for Precision Eng., Vol. 30, No. 12, pp. 1253~1258, 2013.
21. Jae-Seob Kawk, Tae-Soo Kwak, "Review of Technology Trends for Ceramics Removal Machining", J. of the Korean Soc. for Precision Eng., Vol. 30, No. 12, pp. 1227~1235, 2013.
20. Chul-Bae Son, Man-Hee You, Jae-Seob Kwak, "Determination of Curvature Radius of Magnetic Tool Using Weighted Magnetic flux Density in Magnetic Abrasive Polishing, J of the Korean Soc. of Manuf. Process Eng., Vol. 12, No. 3, pp. 69-75, 2013.
19. Seong-Ryeol Han, Jae-Seob Kwak, "A Study on the Vibration Transmission Property of Automotive Air Conditioning Assembly by Frequency Response Analysis, J of the Korean Soc. of Manuf. Process Eng., Vol. 12, No. 3, pp. 48-53, 2013.
18. Sung-Ho Lee, Jae-Seob Kwak, "A Study on the Optimization of Deburring Process for the Micro Channel Using EP-MAP Hybrid Process", J of the Korean Soc. of Manuf. Technol. Eng., Vol. 22, No. 2, pp. 298-303, 2013.
17. Sang-Oh Kim, Chul-Bae Son, Jae-Seob Kwak, "Characteristic of EP-MAP for Deburring of Microgroove using EP-MAP", Trans. of the KSME(A), Vol. 37, No. 3, pp. 313~318, 2013.
2012
16. Kwang-Heui Kim, Chang-Min Shin, Tae-Wan Kim, Jae-Seob Kwak, "Surface Condition Monitoring in Magnetic Abrasive Polishing NAK80 Using AE Sensor and Neural Network", J of the Korean Soc. of Manuf. Technol. Eng., Vol. 21, No. 4, pp. 601-607, 2012.
15. Chang-Min Shin, Dae-Min Kang, Jong-Whan Choi, Jae-Seob Kwak, "Prediction of Tensile Strength for Friction-Welded Magnesium Alloy Part by Acoustic Emission", J of the Korean Soc. of Manuf. Process Eng., Vol. 11, No. 2, pp. 34-39, 2012.
14. Jae-Seob Kwak, Tae-Soo Kwak, "Magnetic Abrasive Polishing and its Application", J. of the Korean Soc. for Precision Eng., Vol. 29, No. 3, pp. 266~272, 2012.
13. Jae-Seob Kwak, Geon-Hee Kim, Yong-Chul Lee, Hitoshi Ohmori and Tae-Soo Kwak "Properties of ELID Mirror-Surface Grinding for Single crystal Sapphire Optics", J. of the Korean Soc. for Precision Eng., Vol. 29, No. 3, pp. 247~252, 2012.
12. Sang-Oh Kim, Jae-Seob Kwak, "Fault Detection of the Cylindrical Plunge Grinding Process by Using the Parameters of AE Signals", Trans. of the KSME(A), Vol. 36, No. 3, pp. 259~264, 2011.
2011
11. Sang-Oh Kim, Sung-Ho Lee, Jae-Seob Kwak, "A Study on Polishing of Grooved Surface by the Second-Generation Magnetic Abrasive Polishing", Trans. of the KSME(A), Vol. 35, No. 12, pp. 1641~1646, 2011.
10. Dae-Min Kang, Jae-Seob Kwak, Jong-Whan Chio, Kyeong-Do Park,"Optimization for Friction Welding of AZ31 Mg Alloy by Design of Experiments", J of the Korean Soc. of Manuf. Process Eng., Vol. 10, No. 4, pp. 64-69, 2011.
9. Tae-Kyung Kwak, Jae-Seob Kwak, "The Study on the Application of CNT Particle in High-Precision Magnetic Abrasive Polishing Process", J. of the Korean Soc. of Mach. Tool Eng., Vol. 20, No. 3, pp. 274~279, 2011.
8. Sung-Ho Lee, Sang-Oh Kim, Jae-Seob Kwak, "A Study on Monitoring of the MAP for Non-magnetic Material by AE Signal Analysis", J. of the Korean Soc. of Mach. Tool Eng., Vol. 20, No. 3, pp. 304~309, 2011.
7. Sang-Oh Kim, Sung-Ho Lee, Jae-Seob Kwak, "Development of Prediction Model and Parameter Optimization ofr Second-Generation Magnetic Abrasive Polishing of Magnesium Alloy", Trans. of the KSME(A), Vol. 35, No. 4, pp. 401~407, 2011.
6. Sang-Oh Kim, Man-Hee You, Jae-Seob Kwak, "Tool-path Optimization of Magnetic Abrasive Polishing Using Heuristic Algorithm", J. of the Korean Soc. of Mach. Tool Eng., Vol. 20, No. 2, pp. 174~179, 2011.
2010
5. Han-Sung Gang, Tae-Hui Kim, Jae-Seob Kwak, "Effect of minor elements on the creep resistance of Mg-Zn-Mn-(Ca) Alloy", Trans. of the KSME(A), Vol. 34, No. 11, pp. 1643~1648, 2010.
4. Sang-Oh Kim, Jae-Seob Kwak, "Study on Performnace Improvement in Magnetic Abrasive Polishing Assisted by Silicone Gel Medium", Trans. of the KSME(A), Vol. 34, No. 10, pp. 1499~1505, 2010.
3. Tae-Kyung Kwak, Sang-Oh Kim, Jae-Seob Kwak, "Compound Machining of Milling and MAgentic Abrasive Polishing for Free Form Surface", J. of the Korean Soc. of Mach. Tool Eng., Vol. 19, No. 2, pp. 455~461, 2010.
2. Sang-Oh Kim, Man-Hee You, Jae-Seob Kwak, "Tool Geometry Optimization and Magnetic Abrasive Polishing for Non-ferrous Material", J. of the Korean Soc. of Mach. Tool Eng., Vol. 19, No. 2, pp. 313~320, 2010.
1. Young-Whan Park, Jae-Seob Kwak, Yan Jiating, "Finite Element Analysis and Geometric Parameter Optimization of BMT Driving Assembly", J. of the Korean Soc. of Mach. Tool Eng., Vol. 19, No. 2, pp. 178~183, 2010.